Artikel |
|
Technische data
|
Cable length:
|
Side 1 |
Tightening torque:
|
Family construction form:
|
Thread:
|
Degree of protection (EN IEC 60529):
|
Side 2 |
Tightening torque:
|
Family construction form:
|
Thread:
|
Width across flats:
|
Degree of protection (EN IEC 60529):
|
Electrical data | Supply |
Operating voltage DC:
|
Operating voltage DC min.:
|
Operating voltage DC max.:
|
Current operating per contact max.:
|
Device protection | Electrical |
Additional condition protection degree:
|
Pollution Degree:
|
Rated surge voltage:
|
Mechanical data | Material data |
Color housing:
|
Material housing:
|
Mechanical data | Mounting data |
Mounting method:
|
Environmental characteristics | Climatic |
Operating temperature min.:
|
Operating temperature max.:
|
Additional condition temperature range:
|
Important installation notes |
Note on strain relief:
|
Note on bending radius:
|
Conformity |
Product standard:
|
Cable data
|
Cable |
Cable identification:
|
Cable Type:
|
wire arrangement:
|
Approval (cable):
|
Cable weight [g/m]:
|
Material wire:
|
Resistor (core):
|
Single wire Ø (core):
|
Construction (core):
|
Diameter (core):
|
AWG:
|
Material wire isolation:
|
Material property wire insulation:
|
Shore hardness wire isolation:
|
Wire-Ø incl. isolation:
|
Color/numbering of wires:
|
Stranding combination:
|
Shield:
|
Material jacket:
|
Material property (jacket):
|
Shore hardness jacket:
|
Outer-Ø (jacket):
|
Color jacket:
|
chemical resistance:
|
Nominal voltage:
|
Test voltage:
|
Current load capacity:
|
Temperature range (fixed):
|
Temperature range (mobile):
|
Bending radius (fixed):
|
Bending radius (dynamic):
|
No. of bending cycles (C-track):
|
Travel speed (C-track):
|
Acceleration (C-track):
|
General data | Cable |
Cable identification:
|
Cable Type:
|
Jacket Color:
|
Type of Certificate:
|
Structure | Cable |
Amount stranding:
|
Stranding:
|
Filler:
|
wire arrangement:
|
Mechanical data | Cable |
Cable weigth:
|
Material jacket:
|
Shore hardness jacket:
|
Freedom from ingredients (jacket):
|
Outer-diameter (jacket):
|
Tolerance outer diameter (sheath):
|
Material wire insulation:
|
Amount wires:
|
Outer diameter insulation :
|
Outer diameter tolerance core insulation:
|
Shore hardness wire insulation:
|
Ingredient freeness wire insulation:
|
Amount strands (wire):
|
Diameter of single wires:
|
Conductor crosssection (wire):
|
Material conductor wire:
|
Conductor type (wire):
|
Electrical data | Cable |
Nominal voltage AC max.:
|
Current load capacity (standard):
|
Current load capacity min. wire:
|
Electrical resistance line constant wire:
|
AC withstand voltage (wire - wire):
|
Power frequency withstand voltage (wire - jacket):
|
Temperature range | Cable |
Min. operating temperature (static):
|
Max. operating temperature (fixed):
|
Operating temperature min. (dynamic):
|
Operating temperature max. (dynamic):
|
Resistances | Cable |
Hydrolysis resistance:
|
Ozone resistance:
|
Seewater resistance:
|
Acid and alkali resistance:
|
UV resistance:
|
Flame resistance:
|
chemical resistance:
|
Gasoline resistance:
|
Oil resistance:
|
Installation | Cable |
Bending radius (fixed):
|
Bending radius (dynamic):
|
No. of bending cycles (C-track):
|
Traversing distance (C-track):
|
Travel speed (C-track):
|
No. of torsion cycles:
|
Torsion stress:
|
Torsion speed:
|
Classifications |
ECLASS-6.0:
|
ECLASS-6.1:
|
ECLASS-7.0:
|
ECLASS-8.0:
|
ECLASS-9.0:
|
ECLASS-10.1:
|
ECLASS-11.1:
|
ECLASS-12.0:
|
ETIM-5.0:
|
Commerciële gegevens |
Douane tarief nummer:
|
GTIN:
|
Verpakkingseenheid:
|
Toelatingen
|
Certificates |
|
|
|
|
|
|
|
|
|
|
|
10 m
|
10 m
|
|
|
0,4 Nm
|
0,4 Nm
|
MSUD
|
MSUD
|
M3
|
M3
|
IP67
|
IP67
|
|
|
0,6 Nm
|
0,6 Nm
|
M12
|
M12
|
M12 x 1
|
M12 x 1
|
SW13
|
SW13
|
IP67
|
IP67
|
|
|
24 V
|
24 V
|
18 V
|
18 V
|
30 V
|
30 V
|
4 A
|
4 A
|
|
|
inserted, screwed
|
inserted, screwed
|
-
|
3
|
0,8 kV
|
0,8 kV
|
|
|
black
|
black
|
Plastic
|
Plastic
|
|
|
inserted, screwed
|
inserted, screwed
|
|
|
-25 °C
|
-25 °C
|
85 °C
|
85 °C
|
depending on cable quality
|
depending on cable quality
|
|
|
-
|
Protect the connectors by suitable measures from mechanical loads, e.g. by the usage of cable ties.
|
-
|
Attention: Observe the permissible bending radii when laying cables, as the IP protection class can be endangered by excessive bending forces.
|
|
|
-
|
DIN EN 61076-2-101 (M12); DIN EN 175301-803 (Ventilstecker)
|
|
|
|
|
625
|
-
|
2 (PUR/PVC)
|
-
|
-
|
brown, black, blue, white, green-yellow
|
UL (AWM-Style 20549/1731), CSA; CE conform
|
-
|
54,78 g
|
-
|
Cu wire, bare
|
-
|
max. 57 Ω/km (20 °C)
|
-
|
0.1 mm
|
-
|
42× 0.1 mm (multi-strand wire class 6)
|
-
|
5× 0.34 mm²
|
-
|
similar to AWG 22
|
-
|
PVC
|
-
|
CFC-, cadmium-, silicone- and lead-free
|
-
|
43 ±5 D
|
-
|
1.25 mm ±5%
|
-
|
br, bk, bl, wh, gnye longitudinally striped
|
-
|
5 wires twisted around central filler
|
-
|
no
|
-
|
PUR/PVC
|
-
|
CFC-, halogen-, cadmium-, silicone- and lead-free, matt, low-adhesion, machine easy to process, abrasion-resistant, hydrolysis and microbial resistant
|
-
|
80 ±5 A (PVC-under jacket); 85 ±5 A (PUR-jacket)
|
-
|
5.0 mm ±5%
|
-
|
black
|
-
|
good resistance to oil, gasoline and chemicals
|
-
|
UL 300 V AC
|
-
|
2000 V AC
|
-
|
to DIN VDE 0298-4
|
-
|
-30...+80 °C
|
-
|
-5...+80 °C
|
-
|
10× outer Ø
|
-
|
15× outer Ø
|
-
|
max. 2 Mio. (25 °C)
|
-
|
max. 3.3 m/s
|
-
|
max. 5 m/s²
|
-
|
|
|
-
|
635
|
-
|
3
|
-
|
black
|
-
|
cURus
|
|
|
-
|
1
|
-
|
5 wires around Core filler twisted
|
-
|
yes
|
-
|
brown, black, blue, white, green-yellow
|
|
|
-
|
41,8 g/m
|
-
|
PUR
|
-
|
90 ± 5 Shore A
|
-
|
lead-free, cadmium-free, CFC-free, halogen-free, silicone-free
|
-
|
4,8 mm
|
-
|
± 5 %
|
-
|
PP
|
-
|
5
|
-
|
1,25 mm
|
-
|
± 5 %
|
-
|
70 ± 5 Shore D
|
-
|
lead-free, cadmium-free, CFC-free, halogen-free, silicone-free
|
-
|
42
|
-
|
0,1 mm
|
-
|
0,34 mm²
|
-
|
Stranded copper wire, bare
|
-
|
strand class 6
|
|
|
-
|
300 V
|
-
|
to DIN VDE 0298-4
|
-
|
4,5 A
|
-
|
57 Ω/km @ 20 °C
|
-
|
2,5 kV @ 60 s
|
-
|
2,5 kV @ 60 s
|
|
|
-
|
-40 °C
|
-
|
80 °C / 90 °C @ 10000 h Operation
|
-
|
-25 °C
|
-
|
80 °C / 90 °C @ 10000 h Operation
|
|
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
DIN EN ISO 4892-2 A
|
-
|
UL 1581 § 1100 FT2 | UL 1581 § 1090 | IEC 60332-2-2
|
-
|
Good, application-related testing
|
-
|
Good, application-related testing
|
-
|
Good, application-related testing | DIN EN 60811-404
|
|
|
-
|
5 x Outer diameter
|
-
|
10 x Outer diameter
|
-
|
10 Mio. @ 25 °C
|
-
|
10 m @ 25 °C | horizontal
|
-
|
3 m/s @ 25 °C
|
-
|
2 Mio.
|
-
|
± 180 °/m
|
-
|
35 cycles/min
|
|
|
27279218
|
27279218
|
27279218
|
-
|
27279218
|
27279218
|
27279218
|
27279218
|
27060312
|
27060311
|
27060312
|
27060312
|
27060312
|
27060312
|
27060312
|
27060312
|
EC001855
|
EC001855
|
|
|
85444290
|
85444290
|
4048879150439
|
4048879150330
|
1
|
1
|
|
|
|
|
|
|
|
|
|
|
|
|
|